1pc threaded Ball Valve with lockable handle is a quarter turn valve that uses a hollow, perforated and rotatable ball to control flow through it. Durable, performs well after many cycles, and is reliable enough to shut down safely even after extended per
ABA blown film machine, has a unique advantage in the production of HDPE, LDPE and LLDPE material. The physical strength of the film is improved by co-extrusion. Its two hosts supply three-layer extrusion, one to blow internal and extemal coating layer, a
With the continuous development of the aluminum alloy die-casting industry, the renewal and innovation of various replacement products requires a variety of aluminum alloy die-casting parts with complex shapes and high precision requirements.
The material of the Revolving Handle Stamping Handwheel is carefully selected high-quality stainless steel, because of the special structure and performance of stainless steel, the hand wheel made of stainless steel can have a wider range of shape choices
YSIQ10 series electric single seat control valve structure is top guiding.The advantage as below: 1.Compact structure 2.Small volume 3.Lighter 4.Sensitive action 5.S type Flow channel, low pressure drop loss, large circulation capacity,flow characteristic
Size: NPS1/2” to NPS8”(DN15 to DN200) Pressure Rating: ASME Class150 to Class2500 (PN16 to PN420) Body Material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Stainless Seat: Soft, Metal to Metal
Size: NPS1/2”to NPS8” (DN15 to DN200) Pressure Rating: ASME Class150 to Class2500 (PN16 to PN420) Body Material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Stainless Seat: Soft, Metal to Metal
Main gearbox upper housing casting introduction: The figure as shown is FD2250G upper box, a upper box of wind turbine gearbox supplied to NGC. Combined with the lower box body of FD2250G, it is the box shell of the wind power gear box.With the casting gr
It is for CADILLAC for USA market, fitting for Rear Axle, the Cardone No. for another hand is 18-4117,customized pistons, the bore size is 63mm, the material is iron, normally we will make zinc-plated for this model, it has black, silver and golden for yo
With the rapid development of modern metallurgical industry, higher requirements are placed on the shafts used by metallurgical enterprises. It not only meets the requirements of high speed, heavy load and high precision of the manufacturer, but also meet
Sand cloth with High-quality calcined aluminum oxide grains. Fiberglass base with high strength fiber glass to ensure good safety and not easy to block.