Hex Bolts are similar to Hex head cap screws except they do not have a washer face under the head and do not have chamfered threads on the end.

Made of carbon steel,these fasteners are applicable for most low strength commercial and industries uses.

Galvanized plating protects the bolt from corrosion,typically used in outdoor applications.

The unthreaded grip length should be chosen carefully, to be around the same length as the thickness of the material and washers through which the bolt passes. An overly long unthreaded length prevents the nut from being tightened down correctly. An insufficient unthreaded length results in the threads extending into the hole, and places the dowel shear load onto the threads, which may cause fretting wear on the hole. No more than two turns of the thread should be within the hole.

1. Usage method：

a.Drill a hole to the recommended diameter and depth. Clean out the hole before attempting to put the screw through. Also double check that you have the right size bolt for the hole.

b.Securing the screw with the Nut. Take a nut that fits the screw and place it at the opposite side of the bolt, away from the head. That can hold the two objects together. It's best to use a wrench to twist it through.

2.Scope of use：

It can be used to fasten components in machines, tools, appliances and electronic devices. Machine screws have machine threads for use with a nut or in a tapped hole. Also referred to as a stove bolt.

3.Product advantages：

corrosion-resistant, easy to use

http://www.cf-fasteners.com/